<samp id="6qyqu"><label id="6qyqu"></label></samp>
  • <blockquote id="6qyqu"><object id="6qyqu"></object></blockquote>
  • <label id="6qyqu"><s id="6qyqu"></s></label>
  • Home> News / Company News
       
    Danfoss's global sales manager visits our company
    2017-05-05

    Danfoss's global sales manager visits our company

    In May 4, 2017, the world's only production of the most complete combustion machine parts industry group Danfoss Danfoss global sales manager of our company to visit, and to provide the corresponding cooperation agreement, first affirmed our work,…

    More
     
    The actual flow rate of fuel injector at different pressure
    2015-08-23

    The actual flow rate of fuel injector at different pressure

    The same nozzle will have different flow at different pressure. With the increase of the pressure of the pump and the increase of the nozzle specification, the injection capacity will increase continuously…

    More
     
    Understand the trouble with the burning machine (black smoke)
    2015-06-16

    Understand the trouble with the burning machine (black smoke)

    Fault sign: black smoke when burning. Possible reasons: perhaps the throttle is too small, or the position of the joint holder is too front…

    More
     
    Brief introduction of main components function of combustion engine
    2014-03-18

    Brief introduction of main components function of combustion engine

    Control the operation process of the entire combustion engine, from start blowing to ignition, output fuel burning, etc., the control box in accordance with the established sequence of control of each component operation…

    More
     
    Understand how the burner has problems (control box)
    2014-02-08

    Understand how the burner has problems (control box)

    Fault sign: switch on the power supply, the burner doesn't start, the control box lights the trouble light…

    More
     
    Matters needing attention in daily operation of combustion engine
    2014-02-05

    Matters needing attention in daily operation of combustion engine

    Periodically clean the oil filter. Each time the cleaning is separated, depending on the quality of the fuel used. If a single tubing system is used, exhaust procedures are required to restart the combustion engine after each filter is cleaned.…

    More


    WeChat consulting! Close
    竞彩堂